Electronics For You » All Posts https://www.electronicsforu.com/forums/feed/ Thu, 07 Nov 2024 06:45:06 +0000 https://bbpress.org/?v=2.6.11 en-GB https://www.electronicsforu.com/forums/topic/smallest-gps-tracker#post-148553 <![CDATA[Reply To: Smallest gps tracker]]> https://www.electronicsforu.com/forums/topic/smallest-gps-tracker#post-148553 Fri, 27 Sep 2024 06:10:09 +0000 EFY Bureau Hi Raghavendra, you can get all the information regarding the project on this page. And, if you want to know about Indusboard, you can refer to this page.

]]> https://www.electronicsforu.com/forums/topic/smallest-gps-tracker#post-148222 <![CDATA[Smallest gps tracker]]> https://www.electronicsforu.com/forums/topic/smallest-gps-tracker#post-148222 Sun, 22 Sep 2024 09:47:26 +0000 Raghavendra Reddy Iam a college student working on indusboard for my college project and iam interested to make a smallest gps tracker and I want to know more information about the board and the diy project…

]]> https://www.electronicsforu.com/forums/topic/can-we-know-the-directions-of-magnetometer-and-how-to-calibrate-it-to-a-compass#post-147454 <![CDATA[Reply To: Can we know the directions of magnetometer and how to calibrate it to a compass]]> https://www.electronicsforu.com/forums/topic/can-we-know-the-directions-of-magnetometer-and-how-to-calibrate-it-to-a-compass#post-147454 Tue, 03 Sep 2024 06:16:39 +0000 Ashwini Sinha The magnetometer will show the data in degree from magnetic north of earth. Put the IndusBoard on flat surface and rotate it you will ge a 0 degree point that is north of Indusboard

]]> https://www.electronicsforu.com/forums/topic/is-there-a-scope-to-make-a-diy-weather-balloon-project-based-on-the-indusboard#post-147250 <![CDATA[Reply To: Is there a scope to make a DIY weather balloon project based on the indusboard]]> https://www.electronicsforu.com/forums/topic/is-there-a-scope-to-make-a-diy-weather-balloon-project-based-on-the-indusboard#post-147250 Fri, 30 Aug 2024 06:17:33 +0000 Ashwini Sinha For weather balloon you might also need the Long range RF communication module Either LoRA or SIM800l using celleluar network

]]> https://www.electronicsforu.com/forums/topic/is-there-a-scope-to-make-a-diy-weather-balloon-project-based-on-the-indusboard#post-147251 <![CDATA[Reply To: Is there a scope to make a DIY weather balloon project based on the indusboard]]> https://www.electronicsforu.com/forums/topic/is-there-a-scope-to-make-a-diy-weather-balloon-project-based-on-the-indusboard#post-147251 Fri, 30 Aug 2024 06:17:33 +0000 Ashwini Sinha For weather balloon you might also need the Long range RF communication module Either LoRA or SIM800l using celleluar network

]]> https://www.electronicsforu.com/forums/topic/is-there-a-scope-to-make-a-diy-weather-balloon-project-based-on-the-indusboard#post-146850 <![CDATA[Is there a scope to make a DIY weather balloon project based on the indusboard]]> https://www.electronicsforu.com/forums/topic/is-there-a-scope-to-make-a-diy-weather-balloon-project-based-on-the-indusboard#post-146850 Thu, 22 Aug 2024 13:17:52 +0000 Maneesh Reddy what could be the potential list of materials and is it feasible to make a good weather balloon with the indus board coin

]]> https://www.electronicsforu.com/forums/topic/can-we-know-the-directions-of-magnetometer-and-how-to-calibrate-it-to-a-compass#post-146849 <![CDATA[Can we know the directions of magnetometer and how to calibrate it to a compass]]> https://www.electronicsforu.com/forums/topic/can-we-know-the-directions-of-magnetometer-and-how-to-calibrate-it-to-a-compass#post-146849 Thu, 22 Aug 2024 13:16:19 +0000 Maneesh Reddy Do we have a way to decide which way the magnetometer is facing towards when using the DIY airtag project.

]]> https://www.electronicsforu.com/forums/topic/how-much-current-esp-32-or-esp-8266-gpio-pins-can-provide-2#post-146673 <![CDATA[Reply To: How much current ESP 32 or ESP 8266 GPIO pins can provide]]> https://www.electronicsforu.com/forums/topic/how-much-current-esp-32-or-esp-8266-gpio-pins-can-provide-2#post-146673 Tue, 20 Aug 2024 02:05:38 +0000 ESP32 GPIO Pins:
Maximum current per GPIO pin: 40mA.
Total maximum allowed current: 120mA (sum of all GPIO pins).
Note: While a single GPIO pin can output 40mA, prolonged high-current use may lead to overheating or damage to the chip. It is recommended to keep the current below 20mA for stability.
ESP8266 GPIO Pins:
Maximum current per GPIO pin: 12mA.
Total maximum allowed current: 70mA (sum of all GPIO pins).
Similar to the ESP32, it’s advisable to limit the current to a lower value in practice to extend the chip’s lifespan and prevent overheating.
So, the ESP32 GPIOs can provide higher current, but caution should be exercised to avoid damaging the chip.

]]> https://www.electronicsforu.com/forums/topic/newbie-needs-help-troubleshooting-a-bob-beck-blood-electrification-circuit#post-143130 <![CDATA[Reply To: Newbie needs help troubleshooting a Bob Beck blood electrification circuit]]> https://www.electronicsforu.com/forums/topic/newbie-needs-help-troubleshooting-a-bob-beck-blood-electrification-circuit#post-143130 Fri, 21 Jun 2024 06:29:46 +0000 EFY Bureau Kindly email all the information, photos and PDFs at onedit@efy.in

  • This reply was modified 3 months ago by EFY Bureau.
]]> https://www.electronicsforu.com/forums/topic/how-can-i-publish-my-articles-or-diy-projects-for#post-142361 <![CDATA[Reply To: How can I publish my articles or DIY projects for…]]> https://www.electronicsforu.com/forums/topic/how-can-i-publish-my-articles-or-diy-projects-for#post-142361 Tue, 11 Jun 2024 18:10:41 +0000 thanks alot for this information…

]]>